Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE FLUID (for HV Model TMMF, TMMCZ Made) › from 2021.11
RM36W0E _54 Brake _088656 BRAKE SYSTEM (OTHER) _0489855 BRAKE FLUID(for HV Model TMMF, TMMCZ Made) G

BRAKE SYSTEM (OTHER)  BRAKE FLUID(for HV Model TMMF, TMMCZ Made)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT BRAKE FLUID LEVEL IN RESERVOIR (for LHD)

a.
C436672C01
1.292,1.135 1.875,1.135 true 1.271,1.49 1.854,1.49 true 1.906,1.042 2.073,1.208 0.167,0.167 10 true *a 1.875,1.417 2.031,1.583 0.156,0.167 10 true *b
*a MAX Line
*b MIN Line


Check the fluid level.

HINT:
·

If the brake fluid level is lower than the MIN line, inspect for brake fluid leaks and brake pad wear. If necessary, refill the reservoir with brake fluid to the MAX line after repair or replacement.

·

The brake fluid level must always be adjusted to the MAX line.



Brake Fluid:

SAE J1703 or FMVSS No. 116 DOT3

SAE J1704 or FMVSS No. 116 DOT4


NOTICE:

If using a dropper to adjust the fluid amount, make sure that the dropper has not been used with mineral oils, water or deteriorated brake fluid. Sealed areas may deteriorate and lead to fluid leaks, or the fluid may deteriorate and lead to decreased efficiency.



Hide 2.INSPECT BRAKE FLUID LEVEL IN RESERVOIR (for RHD)

a.
C436673C01
1.76,1.25 2.354,1.25 true 1.521,1.802 2.208,1.802 true 2.396,1.146 2.563,1.302 0.167,0.156 10 true *a 2.25,1.729 2.417,1.896 0.167,0.167 10 true *b
*a MAX Line
*b MIN Line


Check the fluid level.

HINT:
·

If the brake fluid level is lower than the MIN line, inspect for brake fluid leaks and brake pad wear. If necessary, refill the reservoir with brake fluid to the MAX line after repair or replacement.

·

The brake fluid level must always be adjusted to the MAX line.



Brake Fluid:

SAE J1703 or FMVSS No. 116 DOT3

SAE J1704 or FMVSS No. 116 DOT4


NOTICE:

If using a dropper to adjust the fluid amount, make sure that the dropper has not been used with mineral oils, water or deteriorated brake fluid. Sealed areas may deteriorate and lead to fluid leaks, or the fluid may deteriorate and lead to decreased efficiency.