Home › Drivetrain › P910 (HYBRID TRANSMISSION / TRANSAXLE) › SHIFT LEVER (for TMMF, TMMCZ Made) › from 2021.11
RM36W0E _52 Drivetrain _088636 P910 HYBRID TRANSMISSION / TRANSAXLE _0492210 SHIFT LEVER(for TMMF, TMMCZ Made) G

P910 HYBRID TRANSMISSION / TRANSAXLE  SHIFT LEVER(for TMMF, TMMCZ Made)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.SECURE VEHICLE

a.

Fully apply the parking brake and chock a wheel.

CAUTION:
·
C332327

Make sure to apply the parking brake and chock a wheel before performing this procedure.

·

If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.




Hide 2.INSPECT SHIFT LEVER POSITION

a.

When moving the shift lever from N to each position with the ignition switch to ON and the brake pedal depressed, check that the shift lever moves smoothly and that the shift position indicator comes on properly according to the shift lever position.


b.

Turn the ignition switch to ON (READY), and check that the vehicle moves forward when the shift lever is moved from N to D and moves rearward when the shift lever is moved to R.

If the operation is not as specified, inspect the shift lever position sensor and shift lever assembly.


Hide 3.INSPECT SHIFT LOCK OPERATION

a.

Move the shift lever to P.


b.

Turn the ignition switch off.


c.

Check that the shift lever cannot be moved from P to any other position.


d.

Turn the ignition switch to ON, depress the brake pedal, and check that the shift lever can be moved from P to any other position.

If the operation is not as specified, inspect the shift lever assembly.


Hide 4.INSPECT SHIFT LOCK RELEASE BUTTON OPERATION

a.

Move the shift lever to P.


b.

Turn the ignition switch off.


c.

Remove the shift lever cap.


d.

When moving the shift lever with the shift lock release button pressed, check that the shift lever can be moved from P to any other position.

If the operation is not as specified, inspect the shift lever assembly.


e.

Install the shift lever cap.


Hide 5.INSPECT KEY INTERLOCK OPERATION (w/o Smart Entry and Start System)

a.

Turn the ignition switch to ON.


b.

Depress the brake pedal and move the shift lever to any position other than P.


c.

Check that the ignition key cannot be turned to LOCK.


d.

Move the shift lever to P, turn the ignition key to LOCK and check that the ignition key can be removed.

If the operation is not as specified, inspect the shift lever assembly.