Home › Drivetrain › P910 (HYBRID TRANSMISSION / TRANSAXLE) › SHIFT LEVER KNOB (for TMMF, TMMCZ Made) › from 2021.11
RM36W0E _52 Drivetrain _088636 P910 HYBRID TRANSMISSION / TRANSAXLE _0492211 SHIFT LEVER KNOB(for TMMF, TMMCZ Made) A

P910 HYBRID TRANSMISSION / TRANSAXLE  SHIFT LEVER KNOB(for TMMF, TMMCZ Made)  REMOVAL  


PROCEDURE

Hide 33504F 1.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

a.
C435119

Disengage the 2 claws to disconnect the shifting hole cover sub-assembly as shown in the illustration.


b.
C435120C01
2.083,1.333 2.25,1.833 2.25,1.833 2.417,1.833 true 0.667,1.5 0.75,1.167 0.75,1.167 0.917,1.167 true 2.438,1.719 2.604,1.927 0.167,0.208 10 true *b 0.948,1.063 1.104,1.26 0.156,0.198 10 true *a
*a Clip
*b Protective Tape


Using a screwdriver with its tip wrapped with protective tape, expand the LH side clip and pull out the shift lever knob sub-assembly from the transmission floor shift assembly as shown in the illustration.

NOTICE:

Be careful not to damage the shift lever knob sub-assembly.