Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
1.REMOVE FRONT WHEEL
47748
2.REMOVE FRONT DISC BRAKE ANTI-RATTLE SPRING
Remove the front disc brake anti-rattle spring from the front disc brake cylinder assembly.
47750
3.SEPARATE FRONT DISC BRAKE CYLINDER ASSEMBLY
Remove the 2 slide pin caps.
Using a socket hexagon 7 mm, remove the 2 front disc brake cylinder slide pins and disc brake cylinder assembly.
Use wire or an equivalent tool to keep the disc brake cylinder assembly from hanging by the front flexible hose.
4.REMOVE FRONT DISC BRAKE PAD
Remove the brake pad from the front disc brake cylinder mounting and front disc brake cylinder assembly.