Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER (for 5 Door) › from 2021.11
RM36W0E _59 Vehicle Exterior _088302 EXTERIOR PANELS / TRIM _0447293 REAR BUMPER(for 5 Door) A

EXTERIOR PANELS / TRIM  REAR BUMPER(for 5 Door)  REASSEMBLY  


PROCEDURE

Hide 52023 1.INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY (w/ Reinforcement)

a.
B562758

Install the rear bumper reinforcement sub-assembly with 6 bolts.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


Hide 52156A 2.INSTALL REAR BUMPER SIDE SUPPORT LH

a.
B562757

Install the rear bumper side support LH with screw.


b.

w/ Blind Spot Monitor System:

i.
B562756

Engage the wire harness clamp.



Hide 52155A 3.INSTALL REAR BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure as for the LH side.


Hide 5.INSTALL REAR COMBINATION LIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 52576 6.INSTALL REAR BUMPER SIDE RETAINER LH (for TMC Made)

a.
B562755

Engage the guide and claw to install the rear bumper side retainer LH.


b.
B562761

Engage the clips as shown in the illustration.


c.

w/ Blind Spot Monitor System:

i.
B562752

Engage the wire harness clamps.



Hide 52575 7.INSTALL REAR BUMPER SIDE RETAINER RH (for TMC Made)

HINT:

Use the same procedure as for the LH side.


Hide 52576 8.INSTALL REAR BUMPER SIDE RETAINER LH (for TMMF, TMMCZ Made)

a.
B562755

Engage the guide and claw to install the rear bumper side retainer LH.


b.
B562753

Install the 2 screws.


c.

w/ Blind Spot Monitor System:

i.
B562752

Engage the wire harness clamps.



Hide 52575 9.INSTALL REAR BUMPER SIDE RETAINER RH (for TMMF, TMMCZ Made)

HINT:

Use the same procedure as for the LH side.


Hide 52453 10.INSTALL REAR BUMPER CENTER GUARD

a.

for TMC Made:

i.

Engage the claws to install the rear bumper center guard.

B562750



b.

for TMMF, TMMCZ Made:

i.

Engage the claws and guides to install the rear bumper center guard.

B562749



c.

Install the 2 clips.

B562748


Hide 81920 11.INSTALL REFLEX REFLECTOR ASSEMBLY LH

a.
B577637

Engage the guide and claw to install the reflex reflector assembly LH.


b.

Install the screw.


Hide 81910 12.INSTALL REFLEX REFLECTOR ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 82182 13.INSTALL NO. 2 LUGGAGE ROOM WIRE

a.

w/ Parking Support Brake System:

B562745

i.

Engage the clamps to install the No. 2 luggage room wire.



b.

w/o Parking Support Brake System:

B562746

i.

Engage the clamps to install the No. 2 luggage room wire.



Hide 14.INSTALL BACK-UP LIGHT ASSEMBLY

Hide 89348R 15.INSTALL REAR CORNER ULTRASONIC SENSOR RETAINER (w/ Parking Support Brake System)

Hide 89348S 16.INSTALL REAR CENTER ULTRASONIC SENSOR RETAINER (w/ Parking Support Brake System)

Hide 89342 17.INSTALL REAR CORNER ULTRASONIC SENSOR (w/ Parking Support Brake System)

Hide 89342A 18.INSTALL REAR CENTER ULTRASONIC SENSOR (w/ Parking Support Brake System)