Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model TMMF, TMMCZ Made) › from 2021.11
RM36W0E _54 Brake _088016 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0494155 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model TMMF, TMMCZ Made) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for Gasoline Model TMMF, TMMCZ Made)  U130857  Software Incompatibility with Pre-collision Control Module Invalid / Incompatible Software Component  


DESCRIPTION

The skid control ECU (brake actuator assembly) receives the PCS system variant information from the pre-collision system via CAN communication.

DTC U130857 is stored when the PCS system variant information from the pre-collision system and that stored in the skid control ECU (brake actuator assembly) do not match.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
U130857 Software Incompatibility with Pre-collision Control Module Invalid / Incompatible Software Component The vehicle information received from the pre-collision system is invalid.
·

Pre-collision system

·

CAN communication system


Brake

PROCEDURE

1.GO TO PRE-COLLISION SYSTEM

Click hereVehicle Interior>PRE-COLLISION>PRE-COLLISION SYSTEM>U030051

HINT:

If DTC U130857 is output by the electrical controlled brake system, perform troubleshooting for the pre-collision system.


Result:
Proceed to
NEXT



NEXT

END