Wear protective gloves. Sharp areas on the parts may injure your hands.
73178A
1.REMOVE SEAT BELT ANCHOR COVER CAP (for RH Side)
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Using a moulding remover A, disengage the claws and guides to separate the rear seat shoulder belt cover with seat belt anchor cover cap as shown in the illustration.
|
Remove in this Direction |
Disengage the guides to remove the seat belt anchor cover cap as shown in the illustration.
73373
2.REMOVE REAR SEAT SHOULDER BELT COVER (for RH Side)
Remove the rear seat shoulder belt cover.
72667
3.REMOVE REAR SEATBACK LOCK UPPER BEZEL (for RH Side)
| *A | for TMMF, TMMCZ Made |
| *B | for TMC Made |
Disengage the claws to remove the rear seatback lock upper bezel.
Disengage the hooks from the separate type rear seatback cover.
71701B
4.REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY RH (for RH Side)
Disengage the hook.
| *a | Fastener |
Open the 2 fasteners as shown in the illustration.
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped in protective tape, disengage the claws and guides to remove the rear seatback board sub-assembly RH as shown in the illustration.
71931A
5.REMOVE REAR SEAT HEADREST SUPPORT (for RH Side)
|
Remove in this Direction |
w/ Center Headrest
Disengage the claws to remove the 2 rear seat headrest supports as shown in the illustration.
Use the same procedure for rear seat center headrest.
|
Remove in this Direction |
w/ Center Headrest
Disengage the claws to remove the 2 rear seat headrest supports as shown in the illustration.
6.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)
Pass the rear center seat outer belt assembly through the separate type rear seatback cover with pad and remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly RH.
71077S
7.REMOVE SEPARATE TYPE REAR SEATBACK COVER (for RH Side)
Using a screwdriver, disengage the claws to remove the separate type rear seatback cover from the separate type rear seatback pad as shown in the illustration.
| *a | Screwdriver | - | - |
73350C
8.REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY (for RH Side)
72630C
9.REMOVE REAR SEATBACK LOCK ASSEMBLY RH (for RH Side)
Remove the 2 bolts and rear seatback lock assembly RH.
72667
10.REMOVE REAR SEATBACK LOCK UPPER BEZEL (for LH Side)
| *A | for TMMF, TMMCZ Made |
| *B | for TMC Made |
Disengage the claws to remove the rear seatback lock upper bezel.
Disengage the hooks from the separate type rear seatback cover.
71702B
11.REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH (for LH Side)
Disengage the hook.
| *a | Fastener |
Open the 2 fasteners as shown in the illustration.
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped in protective tape, disengage the claws and guides to remove the rear seatback board sub-assembly LH as shown in the illustration.
71931A
12.REMOVE REAR SEAT HEADREST SUPPORT (for LH Side)
|
Remove in this Direction |
Disengage the claws to remove the 2 rear seat headrest supports as shown in the illustration.
13.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)
Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH.
71078S
14.REMOVE SEPARATE TYPE REAR SEATBACK COVER (for LH Side)
Using a screwdriver, disengage the claws to remove the separate type rear seatback cover from the separate type rear seatback pad as shown in the illustration.
| *a | Screwdriver | - | - |
72640A
15.REMOVE REAR SEATBACK LOCK ASSEMBLY LH (for LH Side)
Remove the 2 bolts and rear seatback lock assembly LH.
73717D
16.REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR COVER
|
Remove in this Direction |
Disengage the claws and guides to remove the child restraint seat cover as shown in the illustration.
Use the same procedure for all child restraint seat covers.
|
Remove in this Direction |
Disengage the claws to remove the child restraint seat base cover as shown in the illustration.
Use the same procedure for all child restraint seat base covers.
73735A
17.REMOVE CHILD RESTRAINT SEAT GUIDE CUP
Use the same procedure for all child restraint seat guide cups.
Remove the child restraint seat guide cup.
71611
18.REMOVE REAR SEAT CUSHION PAD (for Gasoline Model)
Disengage the hooks to remove the rear seat cushion pad from the bench type rear seat cushion cover.
71075B
19.REMOVE BENCH TYPE REAR SEAT CUSHION COVER (for Gasoline Model)
Disengage the hooks.
Using a screwdriver, disengage the claws to remove the bench type rear seat cushion cover from the rear seat cushion pad sub-assembly as shown in the illustration.
| *a | Screwdriver | - | - |
71075B
20.REMOVE BENCH TYPE REAR SEAT CUSHION COVER (for HV Model)
Disengage the hooks.
Using a screwdriver, disengage the claws to remove the bench type rear seat cushion cover from the rear seat cushion pad sub-assembly as shown in the illustration.
| *a | Screwdriver | - | - |