Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › from 2021.11
RM36W0E _58 Vehicle Interior _089448 PRE-COLLISION _0424816 PRE-COLLISION SYSTEM U

PRE-COLLISION  PRE-COLLISION SYSTEM  FAIL-SAFE CHART  


FAIL-SAFE FUNCTION


a.

When a malfunction occurs in the pre-collision system, a message will be displayed on the multi-information display and the pre-collision system will be disabled depending on the malfunction.

Warning Message Cause DTC/RoB No. Conditions to Return to Normal
"Pre-Collision System Malfunction Visit Your Dealer" Pre-collision system malfunction C142571 for Gasoline Model:
The ignition switch is turned ON after an abnormal stop light relay signal is no longer received from the skid control ECU (brake actuator assembly).
for HV Model:
The ignition switch is turned ON after an abnormal stop light relay signal is no longer received from the skid control ECU (brake booster with master cylinder assembly)*1 or skid control ECU (brake actuator assembly)*2.
U010087 Communication with the ECM returns to normal.
U010187 for Gasoline Model:
Communication with the transmission control ECU returns to normal.
for HV Model:
Communication with the hybrid vehicle control ECU returns to normal.
U012687 Communication with the steering sensor returns to normal.
U012987 for Gasoline Model:
Communication with the skid control ECU (brake actuator assembly) returns to normal.
for HV Model:
Communication with the skid control ECU (brake booster with master cylinder assembly)*1 or skid control ECU (brake actuator assembly)*2 returns to normal.
U015587 Communication with the combination meter assembly returns to normal.
U023A87 Communication with the forward recognition camera returns to normal.
U029387 Communication with the hybrid vehicle control ECU returns to normal.
U030051 for Gasoline Model:
3 seconds or more elapse after the vehicle information of the millimeter wave radar sensor assembly is acquired from the ECM.
for HV Model:
3 seconds or more elapse after the vehicle information of the millimeter wave radar sensor assembly is acquired from the hybrid vehicle control ECU.
U030057 for Gasoline Model:
The vehicle information stored in the millimeter wave radar sensor assembly and the vehicle information sent from the ECM match.
for HV Model:
The vehicle information stored in the millimeter wave radar sensor assembly and the vehicle information sent from the hybrid vehicle control ECU match.
U041881 for Gasoline Model:
The ignition switch is turned ON after a signal indicating a brake system malfunction is no longer received from the skid control ECU (brake actuator assembly).
for HV Model:
The ignition switch is turned ON after a signal indicating a brake system malfunction is no longer received from the skid control ECU (brake booster with master cylinder assembly)*1 or skid control ECU (brake actuator assembly)*2.
"Pre-Collision System Malfunction Visit Your Dealer" Pre-collision system malfunction X2000 for Gasoline Model:
The ignition switch is turned ON after a signal for indicating a malfunction of the skid control ECU (brake actuator assembly) or yaw rate sensor (airbag ECU assembly) is no longer received.
for HV Model:
The ignition switch is turned ON after a signal indicating a malfunction of the skid control ECU (brake booster with master cylinder assembly)*1 or skid control ECU (brake actuator assembly)*2 or yaw rate sensor (airbag ECU assembly) is no longer received.
X2001 The ignition switch is turned ON after a signal indicating a malfunction of the steering sensor is no longer received from the steering angle sensor.
X2002 for Gasoline Model:
An SFI system malfunction signal is no longer received from the ECM.
for HV Model:
A hybrid control system malfunction signal is no longer received from the hybrid vehicle control ECU.
X2003 for Gasoline Model:
A signal indicating an electronically controlled brake system malfunction is no longer received from the skid control ECU (brake actuator assembly).
for HV Model:
A signal indicating an electronically controlled brake system malfunction is no longer received from the skid control ECU (brake booster with master cylinder assembly)*1 or skid control ECU (brake actuator assembly)*2.
X2012 The ignition switch is turned ON after it is determined that the forward recognition camera is no longer malfunctioning.
X2013 The ignition switch is turned ON after it is determined that the optical axis of the forward recognition camera is no longer misaligned.
X2014 It is determined that the forward recognition camera optical axis is calibrated.
X2018 The ignition switch is turned ON after it is determined that the heater of the forward recognition camera is no longer malfunctioning.
X2020 The system stops receiving destination malfunction signals from the millimeter wave radar sensor assembly.
X2021 The ignition switch is turned ON after a signal from the millimeter wave radar sensor assembly indicating a malfunction is no longer received.
X2022 The ignition switch is turned ON after a signal from the millimeter wave radar sensor assembly indicating beam axis misalignment is no longer received.
"Pre-Collision System Malfunction Visit Your Dealer" Pre-collision system malfunction X2023 A signal from the millimeter wave radar sensor assembly indicating that beam axis has not been calibrated is no longer received.
X202A The destination not programmed signal is no longer received from the millimeter wave radar sensor assembly.
X203E The signal indicating communication malfunction with the power steering ECU assembly is no longer received.
X2074 The signal from the power steering ECU assembly indicating communication malfunction with the millimeter wave radar sensor assembly is no longer received.
X2081 After the ignition switch is turned from off to ON, the signal indicating power steering system steering assist unavailable is no longer received from the power steering ECU assembly.
X2082 After the ignition switch is turned from off to ON, the signal indicating steering assist angle malfunction is no longer received from the power steering ECU assembly.
XF01B After ECU security key update performed.
"Pre-Collision System Radar In Self Calibration Unavailable See Owner's Manual" Millimeter wave radar sensor vertical axis misalignment X2024 Millimeter wave radar sensor beam axis adjustment is completed and beam axis learning is completed
"Pre-Collision System Radar Sensor Blocked Unavailable Clean Radar Sensor" Foreign matter attached to millimeter wave radar sensor assembly X2026 Millimeter wave radar sensor assembly is cleaned
"Pre-Collision System Out of Temperature Range Unavailable See Owner's Manual" Millimeter wave radar sensor assembly temperature malfunction X2027 Millimeter wave radar sensor temperature returns to normal
"Pre-Collision System Unavailable See Owner's Manual" Millimeter wave radar sensor assembly low voltage malfunction X2028 Millimeter wave radar sensor voltage returns to normal
Front Radar Sensor Temporary Unavailable (Radio Wave Interference) X202B The vehicle is moved to a location without radio frequency interference.
HINT:

If the system does not return to normal even after moving the vehicle to a different location, there may be a problem with the steering center position. Inspect the steering system components for incorrect installation, deformation, or damage, and perform calibration or replace components as necessary.


"Front Camera Low Visibility Unavailable See Owner's Manual" Forward recognition camera or area of the windshield in front of the camera is dirty or fogged up X2015 Forward recognition camera or area of windshield glass in front of forward recognition camera is cleaned or defogged
"Front Camera Out of Temperature Range Unavailable Wait until Normal Temperature" Forward recognition camera temperature outside of operational range X2016 Forward recognition camera temperature returns to normal
"Front Camera Unavailable See Owner's Manual" Forward recognition camera voltage outside of operational range X2017 Forward recognition camera voltage returns to normal

*1: for TMC Made

*2: for TMMF, TMMCZ Made