DISASSEMBLY
Removal / installation · Vehicles built Aug 2005 – Oct 2005
Versions by build date: Aug 2005 – Oct 2005 from Nov 2005
| 1.
REMOVE DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System) |
 |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the defroster damper control cable.
| 2.
REMOVE AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System) |
 |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the air mix damper control cable.
| 3.
REMOVE NO. 1 AIR DUCT |
 |
Disengage the 3 claws and remove the air duct.
| 4.
REMOVE NO. 2 AIR DUCT |
 |
Disengage the 3 claws and remove the air duct.
| 5.
REMOVE ASPIRATOR PIPE (for Automatic Air Conditioning System) |
 |
Disengage the 2 claws and remove the aspirator pipe.
| 6.
REMOVE PTC HEATER ASSEMBLY (for Cold Area Specification Vehicles) |
 |
Remove the 2 screws and the PTC heater.
| 7.
REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY |
 |
Disengage the 3 claws and remove the clamp.
- Remove the heater radiator unit from the air conditioner radiator assembly.
| 8.
REMOVE COOLER EXPANSION VALVE |
 |
Using a hexagon wrench 4, remove the 2 hexagon bolts and detach the cooler expansion valve.
Remove the 2 O-rings from the No. 1 cooler evaporator.
| 9.
REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY |
 |
Disengage the cooler thermistor connector.
- Remove the 3 screws.
Disengage the 4 claws and remove the heater case lower.
- Remove the cooler evaporator.
| 10.
REMOVE NO. 1 COOLER THERMISTOR |
 |
Remove the cooler thermistor from the cooler evaporator.