DATA LIST / ACTIVE TEST
System information · Vehicles built from Nov 2005
| DATA LIST |
- HINT:
- By referring to the DATA LIST displayed on the intelligent tester, the value and status of parts such as switches, sensors and actuators can be read without removing any parts. Reading the DATA LIST as the first step of troubleshooting is one method of shortening diagnostic time.
Connect the intelligent tester to the DLC3.

Turn the ignition switch on (IG).
Turn the intelligent tester on.
Select the following menu items: Chassis / ABS/VSC/TRC / Data List.
Item (Display)
Measurement Item:
Range (Display)
Normal Condition
Diagnostic Notes
ABS Warning Lamp
ABS warning light: ON or OFF
ON: ABS warning light ON
OFF: ABS warning light OFF
-
VSC Warning Lamp
VSC warning light: ON or OFF
ON: VSC warning light ON
OFF: VSC warning light OFF
-
Brake Warning Lamp
BRAKE warning light: ON or OFF
ON: BRAKE warning light ON
OFF: BRAKE warning light OFF
-
SLIP Indicator Lamp
SLIP indicator light: ON or OFF
ON: SLIP indicator light ON
OFF: SLIP indicator light OFF
-
Buzzer
Skid control buzzer: ON or OFF
ON: Buzzer ON
OFF: Buzzer OFF
-
Stop Lamp SW
Stop light switch: ON or OFF
ON: Brake pedal depressed
OFF: Brake pedal released
-
Parking Brake SW
Parking brake switch: ON or OFF
ON: Parking brake applied
OFF: Parking brake released
-
Reservoir Warning SW
Brake fluid level warning switch: ON or OFF
ON: Brake fluid level low
OFF: Brake fluid level normal
-
Gear Position (*1)
Gear position information: P/N, R, 1st-6th, FAIL, NOT R
-
-
Shift Information
Shift information: ON or OFF
ON: During gear change
-
Inspection Mode
Skid control ECU status: OTHER or INSPECT
OTHER: Normal mode
INSPECT: Inspection mode
-
Number of IG ON
Number of ignition switch on (IG) operations since entered into inspection mode
Min.: 0, Max.: 255
-
Master Cylinder Sensor
Master cylinder pressure sensor 1 reading:
min.: 0 V, max.: 5 V
When brake pedal released : 0.3 V to 0.9 V
-
Zero Point of M/C
Memorized zero point value of master cylinder pressure sensor:
min.: -12.5 MPa, max.: 12.4 MPa
Min.: -12.5 MPa
Max.: 12.4 MPa
-
Deceleration Sensor 2
Deceleration sensor reading:
min.: -18.52 m/s2, max.: 18.39 m/s2
Min.: -18.52 m/s2
Max.: 18.39 m/s2
-
Yaw Rate Sensor
Yaw rate sensor reading:
min.: -.128 deg/s, max.: 127 deg/s
Min.: -128 deg/s
Max.: 127 deg/s
-
Steering Angle Sensor
Steering angle sensor reading:
min.: -3276.8 deg, max.: 3276.7 deg
Left turn: Increase
Right turn: Decrease
-
Zero Point of Steering Angle
Memorized zero point value of steering angle sensor:
min.: -3276.8 deg, max.: 3276.7 deg
Min.: -3276.8 deg
Max.: 3276.7 deg
-
Lateral G
Lateral G:
min.: -25.11 m/s2, max.: 24.91 m/s2
Min.: -25.11 m/s2
Max.: 24.91 m/s2
-
Yaw Rate Value
Yaw rate value:
min.: -128 deg/s, max.: 127 deg/s
Min.: -128 deg/s
Max.: 127 deg/s
-
Steering Angle Value
Steering angle value:
min.: -3276.8 deg, max.: 3276.7 deg
Left turn: Increase
Right turn: Decrease
-
FR Wheel Speed
Wheel speed sensor (FR) reading:
min.: 0 km/h (0 mph), max.: 326 km/h (202 mph)
Actual wheel speed
Similar to speed indicated on speedometer
FL Wheel Speed
Wheel speed sensor (FL) reading:
min.: 0 km/h (0 mph), max.: 326 km/h (202 mph)
Actual wheel speed
Similar to speed indicated on speedometer
RR Wheel Speed
Wheel speed sensor (RR) reading:
min.: 0 km/h (0 mph), max.: 326 km/h (202 mph)
Actual wheel speed
Similar to speed indicated on speedometer
RL Wheel Speed
Wheel speed sensor (RL) reading:
min.: 0 km/h (0 mph), max.: 326 km/h (202 mph)
Actual wheel speed
Similar to speed indicated on speedometer
Vehicle Speed
Maximum speed sensor reading:
min.: 0 km/h (0 mph), max.: 326 km/h (202 mph)
Actual wheel speed
Similar to speed indicated on speedometer
FR Wheel Acceleration
FR wheel acceleration:
min.: -25.11 m/s2, max.: 24.91 m/s2
Min.: -200.84 m/s2
Max.: 199.27 m/s2
-
FL Wheel Acceleration
FL wheel acceleration:
min.: -25.11 m/s2, max.: 24.91 m/s2
Min.: -200.84 m/s2
Max.: 199.27 m/s2
-
RR Wheel Acceleration
RR wheel acceleration:
min.: -25.11 m/s2, max.: 24.91 m/s2
Min.: -200.84 m/s2
Max.: 199.27 m/s2
-
RL Wheel Acceleration
RL wheel acceleration: min.: -25.11 m/s2, max.: 24.91 m/s2
Min.: -200.84 m/s2
Max.: 199.27 m/s2
-
FR Wheel ABS Ctrl Status
FR wheel ABS control status: ON or OFF
ON: During control
-
FL Wheel ABS Ctrl Status
FL wheel ABS control status: ON or OFF
ON: During control
-
RR Wheel ABS Ctrl Status
RR wheel ABS control status: ON or OFF
ON: During control
-
RL Wheel ABS Ctrl Status
RL wheel ABS control status: ON or OFF
ON: During control
-
FR Wheel EBD Ctrl Status
FR wheel EBD control status: ON or OFF
ON: During control
-
FL Wheel EBD Ctrl Status
FL wheel EBD control status: ON or OFF
ON: During control
-
RR Wheel EBD Ctrl Status
RR wheel EBD control status: ON or OFF
ON: During control
-
RL Wheel EBD Ctrl Status
RL wheel EBD control status: ON or OFF
ON: During control
-
BA Ctrl Status
BA control status: ON or OFF
ON: During control
-
TRC(TRAC) Ctrl Status
TRC control status: ON or OFF
ON: During control
-
TRC(TRAC) Engine Ctrl Status
TRC engine control status: ON or OFF
ON: During control
-
TRC(TRAC) Brake Ctrl Status
TRC brake control status: ON or OFF
ON: During control
-
FR Wheel VSC Ctrl Status
FR wheel VSC control status: ON or OFF
ON: During control
-
FL Wheel VSC Ctrl Status
FL wheel VSC control status: ON or OFF
ON: During control
-
RR Wheel VSC Ctrl Status
RR wheel VSC control status: ON or OFF
ON: During control
-
RL Wheel VSC Ctrl Status
RL wheel VSC control status: ON or OFF
ON: During control
-
Engine Revolutions
Engine revolutions:
min.: 0 r/min, max.: 65535 r/min
-
-
Real Engine Torque
Real engine torque:
min.: -1024 Nm, max.: 1016 Nm
-
-
Solenoid Relay
Solenoid relay: ON or OFF
ON: Solenoid relay ON
OFF: Solenoid relay OFF
-
ECB Motor Relay
ABS Motor relay: ON or OFF
ON: Motor relay ON
OFF: Motor relay OFF
-
TR(A)C/VSC Solenoid (SM2)
TRC/VSC solenoid (SM2): ON or OFF
ON: Operates
-
TR(A)C/VSC Solenoid (SM1)
TRC/VSC solenoid (SM1): ON or OFF
ON: Operates
-
TR(A)C/VSC Solenoid (SRC2)
TRC/VSC solenoid (SRC2): ON or OFF
ON: Operates
-
TR(A)C/VSC Solenoid (SRC1)
TRC/VSC solenoid (SRC1): ON or OFF
ON: Operates
-
ABS Solenoid (SFRH) (*2)
ABS solenoid (SFRH): ON or OFF
ON: Operates
OFF: Does not operate
-
ABS Solenoid (SFRR) (*3)
ABS solenoid (SFRR): ON or OFF
ON: Operates
OFF: Does not operate
-
ABS Solenoid (SFLH) (*4)
ABS solenoid (SFLH): ON or OFF
ON: Operates
OFF: Does not operate
-
ABS Solenoid (SFLR) (*5)
ABS solenoid (SFLR): ON or OFF
ON: Operates
OFF: Does not operate
-
ABS Solenoid (SRRH) (*6)
ABS solenoid (SRRH): ON or OFF
ON: Operates
OFF: Does not operate
-
ABS Solenoid (SRRR) (*7)
ABS solenoid (SRRR): ON or OFF
ON: Operates
OFF: Does not operate
-
ABS Solenoid (SRLH) (*8)
ABS solenoid (SRLH): ON or OFF
ON: Operates
OFF: Does not operate
-
ABS Solenoid (SRLR) (*9)
ABS solenoid (SRLR): ON or OFF
ON: Operates
OFF: Does not operate
-
Number of DTC
Number of recorded DTCs/ min.: 0, max.: 255
Min.: 0
Max.: 255
-
- HINT:
-
*1: only MMT
-
*2: SFRH (S: Solenoid, F: Front, R: Right, H: Holding)
-
*3: SFRR (S: Solenoid, F: Front, R: Right, R: Reduction)
-
*4: SFLH (S: Solenoid, F: Front, L: Left, H: Holding)
-
*5: SFLR (S: Solenoid, F: Front, L: Left, R: Reduction)
-
*6: SRRH (S: Solenoid, R: Rear, R: Right, H: Holding)
-
*7: SRRR (S: Solenoid, R: Rear, R: Right, R: Reduction)
-
*8: SRLH (S: Solenoid, R: Rear, L: Left, H: Holding)
-
*9: SRLR (S: Solenoid, R: Rear, L: Left, R: Reduction)
-
*1: only MMT
| ACTIVE TEST |
- HINT:
- Performing the ACTIVE TEST using the intelligent tester allows parts such as relays and actuator to be operated without removing any parts. Performing the ACTIVE TEST as the first step of troubleshooting is one method of shortening diagnostic time.
- It is possible to display the DATA LIST during the ACTIVE TEST.
Connect the intelligent tester to the DLC3.

Turn the ignition switch on (IG).
Turn the intelligent tester on.
By following the prompts on the tester, perform the ACTIVE TEST.
- HINT:
- The ignition switch must be turned on (IG) to proceed to the ACTIVE TEST using the intelligent tester.
- The ACTIVE TESTs of the ABS motor relay, ABS warning light, VSC warning light, BRAKE warning light and SLIP indicator light are available when the vehicle is stopped.
- The motors stop automatically after 5 seconds of activation to prevent them from being damaged. When the motors are driven repeatedly, certain intervals are required.
- Each solenoid stops automatically after 2 seconds of activation to prevent them from being damaged, and can be operated again after a certain interval.
- Do not depress the brake pedal while only the pressure reduction solenoid valves are on.
- Do not drive 2 or more solenoids simultaneously except to operate the pressure holding solenoid valves and pressure reduction solenoid valves of each wheel.
- The ignition switch must be turned on (IG) to proceed to the ACTIVE TEST using the intelligent tester.
Item (Display)
Test Details
Diagnostic Notes
ABS Warning Lamp
Turns ABS warning light ON or OFF
Observe combination meter
VSC Warning Lamp
Turns VSC warning light ON or OFF
Observe combination meter
Brake Warning Lamp
Turns BRAKE warning light ON or OFF
Observe combination meter
SLIP Indicator Lamp
Turns SLIP indicator light ON or OFF
Observe combination meter
Motor Relay
Turns ABS motor relay ON or OFF
Operation sound of motor can be heard
ABS Solenoid (SRLR)
Turns ABS solenoid (SRLR) ON or OFF
Operation sound of solenoid (clicking sound) can be heard
ABS Solenoid (SRLH)
Turns ABS solenoid (SRLH) ON or OFF
Operation sound of solenoid (clicking sound) can be heard
ABS Solenoid (SRRR)
Turns ABS solenoid (SRRR) ON or OFF
Operation sound of solenoid (clicking sound) can be heard
ABS Solenoid (SRRH)
Turns ABS solenoid (SRRH) ON or OFF
Operation sound of solenoid (clicking sound) can be heard
ABS Solenoid (SFLR)
Turns ABS solenoid (SFLR) ON or OFF
Operation sound of solenoid (clicking sound) can be heard
ABS Solenoid (SFLH)
Turns ABS solenoid (SFLH) ON or OFF
Operation sound of solenoid (clicking sound) can be heard
ABS Solenoid (SFRR)
Turns ABS solenoid (SFRR) ON or OFF
Operation sound of solenoid (clicking sound) can be heard
ABS Solenoid (SFRH)
Turns ABS solenoid (SFRH) ON or OFF
Operation sound of solenoid (clicking sound) can be heard
VSC/TRC Solenoid (SRMR)
Turns VSC / TRC solenoid (SRMR) ON or OFF
Operation sound of solenoid (clicking sound) can be heard
VSC/TRC Solenoid (SRMF)
Turns VSC / TRC solenoid (SRMF) ON or OFF
Operation sound of solenoid (clicking sound) can be heard
VSC/TRC Solenoid (SRCR)
Turns VSC / TRC solenoid (SRCR) ON or OFF
Operation sound of solenoid (clicking sound) can be heard
VSC/TRC Solenoid (SRCF)
Turns VSC / TRC solenoid (SRCF) ON or OFF
Operation sound of solenoid (clicking sound) can be heard