ON-VEHICLE INSPECTION
Inspection · Vehicles built from Jan 2006
| INSPECT STEERING PAD (for Vehicle not Involved in Collision) |
![]() ![]() |
Perform a diagnostic system check (Click here).
With the steering pad installed on the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace the steering pad with a new one:
- Any cuts, minute cracks or marked discoloration on the steering pad top surface or in the grooved portion.
- Any cuts, minute cracks or marked discoloration on the steering pad top surface or in the grooved portion.
| INSPECT STEERING PAD (for Vehicle Involved in Collision and Airbag not Deployed) |
![]() ![]() |
- CAUTION:
- For steering pad removal and installation procedures, see pages Click here and Click here, and carefully follow the correct procedure.
Perform a diagnostic system check (Click here).
With the steering pad removed from the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace the steering pad or steering wheel with a new one:
- Any cuts, minute cracks or marked discoloration on the steering pad top surface or in the grooved portion.
- Any cracks or other damage to the connectors.
- Deformation of the steering wheel.
- Deformation of the horn button contact plate of the steering pad.
-
There should be no interference between the steering pad and steering wheel, and the clearance should be uniform all the way around when a new steering pad is installed on the steering wheel.

- Any cuts, minute cracks or marked discoloration on the steering pad top surface or in the grooved portion.


