ON-VEHICLE INSPECTION
Inspection · Vehicles built from Jan 2006
| INSPECT FRONT PASSENGER AIRBAG ASSEMBLY (for Vehicle not Involved in Collision) |
![]() ![]() |
Perform a diagnostic system check (Click here).
With the front passenger airbag installed on the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace the instrument panel with a new one:
- Any cuts, minute cracks or marked discoloration on the instrument panel around the front passenger airbag.
- Any cuts, minute cracks or marked discoloration on the instrument panel around the front passenger airbag.
| INSPECT FRONT PASSENGER AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed) |
![]() ![]() |
- CAUTION:
- For front passenger airbag removal and installation procedures, see pages Click here and Click here, and carefully follow the correct procedure.
Perform a diagnostic system check (Click here).
With the front passenger airbag removed from the vehicle, perform a visual check. If there are any defects, such as those mentioned below, replace the front passenger airbag, instrument panel or instrument panel reinforcement with new ones:
- Any cuts, minute cracks or marked discoloration on the front passenger airbag.
- Any cracks or other damage to the connector.
- Deformation or cracks on the instrument panel or instrument panel reinforcement.
- Any cuts, minute cracks or marked discoloration on the front passenger airbag.



