CHECK FOR INTERMITTENT PROBLEMS
Troubleshooting · Vehicles built from Nov 2006
- HINT:
- Inspect the vehicle's ECM using check mode. Intermittent problems are easier to detect with an intelligent tester when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2-trip detection logic.
- Clear DTCs (Click here).
- Switch the ECM from normal mode to check mode using the intelligent tester (Click here).
- Perform a simulation test (Click here).
- Check and wiggle the harness(es), connector(s) and terminal(s).
- Clear DTCs (Click here).