INSPECTION
Inspection · Vehicles built from Aug 2005
| INSPECT HEATER BLOWER MOTOR RELAY |
![]() ![]() |
Check the resistance.
Using an ohmmeter, measure the resistance between each terminal.
- Standard resistance:
Tester Connection
Specified Condition
3 - 4
Below 1 Ω
3 - 4
10 kΩ or higher
(Apply battery voltage to terminals 1 and 2)
3 - 5
10 kΩ or higher
3 - 5
Below 1 Ω
(Apply battery voltage to terminals 1 and 2)


