INSPECTION
Inspection · Vehicles built from Aug 2005
| INSPECT FUEL PUMP |
![]() ![]() |
Check the resistance of the fuel pump.
Using an ohmmeter, measure the resistance between terminals 1 and 2.
- Standard resistance:
- 0.2 to 3.0 Ωat 20°C (68°F)
Inspect the operation of the fuel pump.
Connect the positive battery (+) lead to terminal 1 of the connector, and the negative (-) lead to terminal 2. Check that the fuel pump operates.
- NOTICE:
- These tests must be performed within 10 seconds of connecting the battery to prevent the coil from burning out.
- Keep the fuel pump as far away from the battery as possible.
- Turn the voltage on and off on the battery side, not the fuel pump side.
- These tests must be performed within 10 seconds of connecting the battery to prevent the coil from burning out.


