2005-2008 Yaris · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Nov 2005

Versions by build date: Aug 2005 – Oct 2005 from Nov 2005

NOTICE:
Always use "Torx" socket wrench E10 when removing the rear seat.


1. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

  1. B114569E01
    Remove the 2 package tray trim suspenders.

  1. Remove the 5 pieces of hook tape.

  1. Disengage the 2 claws and remove the package tray trim.


2. REMOVE DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

  1. B106371
    Release the 2 knobs and remove the deck board.


3. REMOVE SPARE WHEEL COVER ASSEMBLY (w/ Deck Board)

  1. B119913
    Remove the spare wheel cover.


4. REMOVE DECK FLOOR BOX LH (w/ Deck Board)

  1. B106373
    Release the 2 knobs and remove the deck floor box.


5. REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Deck Board)

  1. B119912
    Remove the rear floor carpet.


6. REMOVE NO. 1 REAR SEAT LEG COVER (for TMC Made)

  1. B126919E01
    Disengage the 4 claws in the sequence shown in the illustration and remove the No. 1 rear seat leg cover.


7. REMOVE NO. 2 REAR SEAT LEG COVER (for TMC Made)

  1. B126921E01
    Disengage the 3 claws in the sequence shown in the illustration and remove the No. 1 rear seat leg cover.


8. REMOVE NO. 2 REAR SEAT LEG COVER (for TMMF Made)

  1. B124330
    Disengage the 6 claws and remove the No. 2 rear seat leg cover.


9. REMOVE REAR SEAT ASSEMBLY (for TMC Made)

  1. B114740
    Using "Torx" socket wrench E10, remove the 3 bolts and pull up the rear seat cushion.

  1. B117760
    Using "Torx" socket wrench E10, remove the 4 bolts and the rear seat.


10. REMOVE REAR SEAT ASSEMBLY (for TMMF Made)

  1. B124331
    Using "Torx" socket wrench E10, remove the 3 bolts and pull up the rear seat cushion.

  1. B124315
    Using "Torx" socket wrench E10, remove the 4 bolts and the rear seat.


11. REMOVE REAR FLOOR SERVICE HOLE COVER

A118713
  1. Remove the clip from the floor carpet.

  1. A118728
    Remove the rear floor service hole cover.

  1. A119173
    Disconnect the fuel pump connector.


12. DISCHARGE FUEL SYSTEM PRESSURE
(Click here)

13. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

14. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

A119169
  1. Widen the tip of the tube joint clip and pull out the clip.

  1. Pull out the fuel tank main tube to disconnect it.

    NOTICE:
    1. Keep the O-ring free of any foreign matter, as it becomes contaminated easily.
    2. Do not use any tools in this procedure.
    3. Do not forcefully bend or twist the tube.
    4. Put the tube in a plastic bag to prevent damage and contamination.
    5. If the fuel suction plate and tube are stuck together, pinch the tube and turn it carefully to disconnect it.
    6. Do not damage any clip. If a clip is damaged, replace it.


15. DISCONNECT FUEL EMISSION TUBE NO. 2

A115476
  1. Loosen the clamp and disconnect fuel emission tube No. 2.


16. DISCONNECT CANISTER OUTLET HOSE SUB-ASSEMBLY NO. 1

A115477
  1. Disconnect the canister outlet hose.


17. REMOVE FUEL PUMP GAUGE RETAINER (for TMC Made)

A119171E01
  1. Using SST, remove the fuel pump gauge retainer.

    SST
    09808-14020   (09808-01410, 09808-01420, 09808-01430)

    HINT:
    Align the claws of the fuel pump gauge retainer and the tips of SST.


18. REMOVE FUEL PUMP GAUGE RETAINER (for TMMF Made)

A118736E01
  1. Using SST, remove the fuel pump gauge retainer.

    SST
    09808-14020   (09808-01410, 09808-01420, 09808-01430)

    HINT:
    Align the claws of the fuel pump gauge retainer and the tips of SST.


19. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

A118739
  1. Remove the fuel suction with pump and gauge tube assembly.

    NOTICE:
    Do not bend the arm of the sender gauge.

  1. A118738
    Remove the fuel suction tube gasket from the fuel tank.


20. REMOVE FUEL SENDER GAUGE ASSEMBLY

A105590
  1. Disconnect the fuel sender gauge connector.

  1. E107756E01
    Unlock the fuel sender gauge, and slide and remove it.

← REMOVAL (Aug 2005 – Oct 2005)INSPECTION (from Aug 2005) →