Release the 2 knobs and remove the deck floor box.
5.
REMOVE REAR SEAT LEG COVER NO. 1 (for Hatchback)
Disengage the 4 claws in the sequence shown in the illustration and remove the No. 1 rear seat leg cover.
6.
REMOVE REAR SEAT LEG COVER NO. 2 (for Hatchback)
Disengage the 3 claws in the sequence shown in the illustration and remove the No. 1 rear seat leg cover.
7.
REMOVE REAR SEAT ASSEMBLY (for Hatchback)
Using "Torx" socket wrench E10, remove the 3 bolts and pull up the rear seat cushion.
Using "Torx" socket wrench E10, remove the 4 bolts and the rear seat.
8.
REMOVE REAR SEAT CUSHION ASSEMBLY (for Sedan)
Hold the front edge of the rear seat cushion cover pad and lift it up, as shown in the illustration, to disengage the 2 hooks.
NOTICE:
Hold the area around the hooks so as to avoid deforming the rear seat cushion frame.
Pass the rear seat inner belt through the slit in the rear seat cushion cover pad, disengage the hook between the rear seat cushion cover pad and the rear seatback, and remove the rear seat cushion cover pad.