DISASSEMBLY
Removal / installation · Vehicles built from Aug 2005
| 1. REMOVE FUEL SENDER GAUGE ASSEMBLY |
![]() ![]() |
Disconnect the connector of the fuel sender gauge.
Release the lock as shown in the illustration and slide the fuel sender gauge to remove it.

| 2. REMOVE FUEL PUMP |
![]() ![]() |
Disconnect the connector of the fuel pump harness.
Disconnect the fuel pump filter hose.

Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws, remove the fuel filter and the fuel pump from the fuel sub-tank.

Disengage the 2 claws and remove the fuel suction support.

Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws, and remove the fuel pump filter and fuel pump from the fuel filter.

- NOTICE:
- Do not damage the fuel pump filter.
- Do not remove the suction filter.
- Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.
- Do not damage the fuel pump filter.
Disconnect the fuel pump harness.

Remove the O-ring.



