2005-2008 Yaris · Service Manual ENGINE

DISASSEMBLY

Removal / installation · Vehicles built from Nov 2005


1. REMOVE FUEL SENDER GAUGE ASSEMBLY

  1. A105590
    Disconnect the connector of the fuel sender gauge.

  1. A119156
    Release the lock as shown in the illustration and slide the fuel sender gauge to remove it.


2. REMOVE FUEL PUMP

  1. A105592
    Disconnect the connector of the fuel pump harness.

  1. A109341
    Disconnect the fuel pump filter hose.

  1. A119168
    Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws, and remove the fuel filter and the fuel pump from the fuel sub-tank.

  1. A119157
    Disengage the 2 claws and remove the fuel suction support.

  1. A105596
    Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws, and remove the fuel pump filter and fuel pump from the fuel filter.

    NOTICE:
    1. Do not damage the fuel pump filter.
    2. Do not remove the suction filter.
    3. Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.

  1. A119164
    Disconnect the fuel pump harness.

  1. A119163
    Remove the O-ring.

← REMOVAL (from Nov 2005)INSPECTION (from Nov 2005) →