REASSEMBLY
Removal / installation · Vehicles built from Nov 2006
| 1.
INSTALL FUEL PUMP |
 |
Apply gasoline to a new O-ring and install it onto the fuel filter.
- NOTICE:
- Do not disassemble the fuel pump or the suction filter because they are nonreusable parts.
- Connect the fuel pump harness.
- Engage the 5 claws on the fuel pump.
- NOTICE:
- Do not remove the suction filter.
- Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.
- Engage the 2 claws on the fuel suction support.
- Engage the 2 claws on the fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.
- Connect the fuel pump filter hose.
- Connect the connector to the fuel pump harness.
| 2.
INSTALL FUEL SENDER GAUGE ASSEMBLY |
 |
- Install the fuel sender gauge by sliding it downward.
- Connect the connector to the fuel sender gauge.