INSTALLATION
Removal / installation · Vehicles built from Nov 2006
| 1.
INSTALL IGNITION SWITCH ASSEMBLY |
 |
Engage the 2 claws and install the ignition switch assembly.
Connect the connector.
| 2.
INSTALL STEERING COLUMN COVER |
 |
Install the screw in the position indicated in the illustration.
- Turn the steering wheel to the left and install the screw in the position indicated in the illustration.
- Turn the steering wheel to the right, and install the screw in the position indicated in the illustration.
| 3.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 48 in.*lbf
}