SYSTEM DESCRIPTION
Troubleshooting · Vehicles built from Aug 2005
| SEAT BELT WARNING SYSTEM DESCRIPTION |
| FUNCTIONS OF MAIN COMPONENTS |
| Components |
Function |
| Front Seat Inner Belt Assembly LH (driver side)*1 Front Seat Inner Belt Assembly RH (driver side)*2 |
Informs main body ECU of front driver seat belt condition (fastened or unfastened) |
| Front Seat Inner Belt Assembly RH (passenger side)*1 Front Seat Inner Belt Assembly LH (passenger side)*2 |
Informs combination meter assembly of front passenger seat belt condition (fastened or unfastened) |
| Occupant Detection Sensor |
Informs combination meter assembly of front passenger seat condition (occupied or unoccupied) |
| Front Driver Seat Belt Warning Light |
If driver seat belt is unfastened and ignition switch is on (IG), combination meter assembly flashes front driver seat belt warning light of combination meter assembly as reminder |
| Front Passenger Seat Belt Warning Light |
Hatchback: When front passenger seat is occupied and ignition switch is on (IG), if passenger seat belt is unfastened, combination meter assembly flashes front passenger seat belt warning light of instrument panel cluster finish panel end as reminder Sedan: When front passenger seat is occupied and ignition switch is on (IG), if passenger seat belt is unfastened, combination meter assembly flashes front passenger seat belt warning light of hazard warning signal switch assembly as reminder |
| Seat Belt Warning Buzzer for Driver Side and Passenger Side*3 |
If driver or passenger seat belt is unfastened and vehicle is driven at 20 km/h (12.4 mph) or more, combination meter assembly sounds buzzer as reminder |
- HINT:
- *1: LHD
- *2: RHD
- *3: Europe, Australia, Middle East and South Africa
| SYSTEM OPERATION |
- When the ignition switch is on (IG), this system detects the condition of the seat belts based on signals from the front seat inner belt switches (for driver and front passenger seats) and the occupant detection sensor (front passenger side only).
- The occupant detection sensor, which is built into the seat cushion of the front passenger seat, is used to detect whether or not the front passenger seat is occupied.