DISASSEMBLY
Removal / installation · Vehicles built from Jan 2006
| 1. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY |
![]() ![]() |
Disengage the 2 claws and remove the air duct.
| 2. REMOVE AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY |
![]() ![]() |
Disengage the 3 claws and remove the air inlet damper control cable.
| 3. REMOVE BLOWER MOTOR |
![]() ![]() |
Remove the 3 screws and the blower motor.
| 4. REMOVE BLOWER RESISTOR |
![]() ![]() |
Remove the 2 screws and the blower resistor.
| 5. REMOVE AIR FILTER CASE |
![]() ![]() |
Pinch portion A to disengage the claw and remove the air filter case.






