INSTALLATION
Removal / installation · Vehicles built from Aug 2005
| 1. INSTALL ROOM TEMPERATURE SENSOR |
![]() ![]() |
Engage the 2 claws and install the room temperature sensor.
| 2. INSTALL AIR CONDITIONING CONTROL ASSEMBLY |
![]() ![]() |
Connect the 2 connectors and the aspirator pipe and engage the clamp.
Engage the 3 clips and 2 claws and install the air conditioner control.

| 3. INSTALL RADIO RECEIVER ASSEMBLY (w/ CD Player) |
![]() ![]() |
Connect the connectors.
Engage the 4 clips and 2 claws and install the radio receiver.
Install the 4 screws.
| 4. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER (Except CD Player) |
![]() ![]() |
Engage the 4 clips and 2 claws and install the instrument cluster finish panel center.
| 5. INSTALL INSTRUMENT CLUSTER FINISH PANEL |
![]() ![]() |
Fit the 3 A claws of the instrument cluster finish panel into the upper instrument cluster finish panel center.
Engage the 4 claws and 5 clips and install the instrument cluster finish panel.

| 6. INSTALL INSTRUMENT PANEL FINISH PANEL END RH |
![]() ![]() |
with CD player
Connect the connector.
Engage the 4 claws and 3 clips and install the instrument panel finish panel end RH.
Except CD player

Connect the connector.
Engage the 5 claws and 3 clips and install the instrument panel finish panel end RH.
| 7. INSTALL INSTRUMENT PANEL FINISH PANEL END LH |
![]() ![]() |
with CD player
Connect the connector.
Engage the 4 claws and 3 clips and install the instrument panel finish panel end LH.
Except CD player

Connect the connector.
Engage the 5 claws and 3 clips and install the instrument panel finish panel end LH.
| 8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm }







