2005-2008 Yaris · Service Manual STEERING

PRECAUTION

Precautions · Vehicles built from Aug 2005


1.PRECAUTIONS WHEN WORKING ON ELECTRIC STEERING LOCK SYSTEM
  1. If the steering lock actuator assembly has been replaced, open and close the driver door. The engine may not start until this operation is performed.

    HINT:
    Performing the above operation causes the steering lock actuator assembly to store the correct steering lock bar position.

  2. When checking for DTCs of the push button start function or checking the data list with the engine switch off, make sure that the driver door is open.

    HINT:
    When the engine switch is off, the main body ECU may not be working. Communication with the intelligent tester is impossible if the main body ECU is not working.

← REPAIR (from Aug 2005)PARTS LOCATION (from Aug 2005) →