Cassette Tape cannot be Ejected
Circuit diagnosis · Vehicles built from Aug 2005
INSPECTION PROCEDURE
| 1. CHECK OPERATION |
Press the cassette tape EJECT switch of the radio receiver for 2 seconds or more and check that the cassette tape is ejected.
- OK:
- Cassette tape is ejected.
|
|
||||
| OK | |
| 2. CHECK CASSETTE TAPE |
Check that the ejected cassette tape does not have a peeling label, cassette body deformation or other problems.
- OK:
- No problems with cassette tape.
|
|
||||
| OK | |
| 3. REPLACE CASSETTE TAPE |
Replace the cassette tape with a normal one and check if the same problem occurs again.
- OK:
- Malfunction disappears.
|
|
||||
| OK | ||
| ||
