CD cannot be Inserted or is Ejected Right After Insertion
Circuit diagnosis · Vehicles built from Aug 2005
INSPECTION PROCEDURE
| 1. CHECK CD |
Make sure that the CD is a normal audio CD, and that it is not deformed, flawed, stained, burred or otherwise defective.
- OK:
- Normal audio CD.
- HINT:
- Translucent or uniquely-shaped CDs cannot be played.
|
|
||||
| OK | |
| 2. CHECK THAT CD HAS BEEN INSERTED PROPERLY |
Check whether the CD was inserted upside down.
- OK:
- CD was properly inserted.
|
|
||||
| OK | |
| 3. CLEAN CD |
Clean the disc by wiping the CD's dataside radially with a soft cloth.

- OK:
- Malfunction disappears.
- NOTICE:
- Do not use a conventional record cleaner or anti-static preservative.
|
|
||||
| NG | |
| 4. OPERATION USING ANOTHER CD |
Replace the CD with a normal one and check if the same problem occurs again.
- OK:
- Malfunction disappears.
|
|
||||
| OK | ||
| ||
