INSTALLATION
Removal / installation · Vehicles built from Aug 2005
| 1. INSTALL STEERING PAD SWITCH LH |
Engage the 2 claws and the pin.

Install the steering pad switch LH with the screw.
Connect the connector.
| 2. INSTALL STEERING PAD |
![]() ![]() |
Connect the horn terminal.
Connect the airbag connector.
- NOTICE:
- Securely lock the locking button.
Install the steering pad.

Using "Torx" socket wrench T30, tighten the 2 bolts.
- Torque:
- 8.8 N*m{ 90 kgf*cm , 78 in.*lbf }
- NOTICE:
- Tighten the 2 bolts while holding the steering pad to prevent it moving upward.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
| 4. INSPECT SRS WARNING LIGHT |

