2005-2008 Yaris · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Aug 2005


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag working.

2. REMOVE STEERING PAD

C117211E01
  1. Using "Torx" socket wrench T30, loosen the 2 bolts completely.

  1. Pull the steering pad toward you.

  1. C117199E01
    Using a thin-bladed screwdriver, release the locking button.

  1. Using a thin-bladed screwdriver, detach the airbag connector.

  1. Detach the horn terminal.


3. REMOVE STEERING PAD SWITCH LH

  1. E107788E01
    Disconnect the connector.

  1. Remove the screw.

  1. Disengage the 2 claws and the pin.

  1. Remove the steering pad switch LH.

← COMPONENTS (from Aug 2005)INSPECTION (from Aug 2005) →