DISASSEMBLY
Removal / installation · Vehicles built from Nov 2005
| 1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
| 2. REMOVE POSITION INDICATOR LIGHT GUIDE |
![]() ![]() |
Disconnect the indicator light wire from the shift lever assembly
Disengage the 4 claws and remove the position indicator light guide from the shift lever assembly.

Disengage the 4 claws and remove the position indicator housing from the position indicator light guide.

| 3. REMOVE POSITION INDICATOR SLIDE COVER |
| 4. REMOVE POSITION INDICATOR SLIDE COVER NO. 2 |
| 5. REMOVE SHIFT LOCK RELEASE BUTTON |
![]() ![]() |
Remove the shift lock release button and compression spring from the shift lever assembly.
| 6. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY |
Disconnect the indicator light wire connector from the shift lever assembly.
Remove the bulb and cap from the indicator light wire.

Using a screwdriver with its tip wrapped in protective tape, release the secondary lock.

Put marks on wire harnesses 2 and 4.

Release the locking lugs of terminals 2, 4, 6 and 8, and pull the wire harness out of the terminals.


