2005-2008 Yaris · Service Manual TRANSMISSION

REASSEMBLY

Removal / installation · Vehicles built from Nov 2005


1. INSTALL SELECT STROKE SENSOR

C114017E01
  1. Apply MP grease to a new O-ring.

  1. Install the new O-ring onto the select stroke sensor.

  1. Set the stroke sensor so that the sensor side and the actuator side sensor arms are in the positions shown in the illustration.

  1. C114023
    Turn the select stroke sensor clockwise and fix it with the 2 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }

← INSPECTION (from Nov 2005)COMPONENTS (from Nov 2005) →