REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE AIR CLEANER INLET NO.1 (for 2SZ-FE) |
![]() ![]() |
Remove the air cleaner inlet No. 1.
| 3. REMOVE BATTERY HOLD DOWN CLAMP |
| 4. REMOVE BATTERY |
| 5. REMOVE BATTERY TRAY |
| 6. REMOVE BATTERY CARRIER (for 1KR-FE) |
![]() ![]() |
Remove the 4 bolts and the battery carrier.
| 7. REMOVE BATTERY CARRIER (for 2SZ-FE) |
![]() ![]() |
Remove the 5 bolts and the battery carrier.
| 8. REMOVE SHIFT STROKE SENSOR |
![]() ![]() |
Remove the bolt and separate the wire harness bracket.
Disconnect the shift stroke sensor connector.

Remove the 2 screws and the shift stroke sensor from the shift and select actuator.
Remove the O-ring from the shift stroke sensor.




