INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1.
INSTALL TRANSMISSION REVOLUTION SENSOR |
 |
Install a new O-ring onto the transmission revolution sensor.
Install the transmission revolution sensor.
- Install the transmission case protector with the bolt.
-
Torque:
- 8.0 N*m{
82 kgf*cm
, 71 in.*lbf
}
- Connect the revolution sensor connector.
| 2.
INSTALL AIR CLEANER ASSEMBLY
|
 |
- Install the air cleaner case sub-assembly with air cleaner inlet with the 3 bolts.
-
Torque:
- 7.8 N*m{
80 kgf*cm
, 69 in.*lbf
}
| 3.
INSTALL NO. 1 AIR CLEANER HOSE |
 |
- Connect the No. 1 air cleaner hose with the 2 clips.
Connect the 2 fuel hoses.
Connect the No. 1 air cleaner hose with the clamp.
-
Torque:
- 6.0 N*m{
61 kgf*cm
, 53 in.*lbf
}
| 4.
INSTALL ENGINE UNDER COVER
|
 |
Provisionally install the engine under cover with the 5 bolts, 4 screws and 2 clips.
Tighten the 4 screws.
Tighten the 5 bolts.
-
Torque:
- 5.0 N*m{
51 kgf*cm
, 44 in.*lbf
}
| 5.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 48 in.*lbf
}