REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DRAIN TRANSAXLE OIL |
Remove the filler plug and the gasket.
Remove the drain plug and gasket and drain the transaxle oil.
Install a new gasket and the drain plug.
- Torque:
- 39 N*m{ 400 kgf*cm , 29 ft.*lbf }
| 2. REMOVE TRANSMISSION REVOLUTION SENSOR |
![]() ![]() |
Disconnect the revolution sensor connector.
Remove the bolt and transmission case protector.

Remove the bolt and transmission revolution sensor.

Using a screwdriver, remove the O-ring from the transmission revolution sensor.

