REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE ENGINE UNDER COVER |
Remove the 5 bolts, 4 screws and 2 clips and remove the engine under cover.
| 3. REMOVE NO. 1 AIR CLEANER HOSE |
Loosen the hose clamp disconnect the No. 1 air cleaner hose.

Disconnect the 2 fuel hoses.
Loosen the 2 clips and disconnect No. 1 air cleaner hose.
| 4. REMOVE AIR CLEANER ASSEMBLY |
Remove the 3 bolts, then remove the air cleaner case with air the cleaner inlet.

| 5. REMOVE TRANSMISSION REVOLUTION SENSOR |
![]() ![]() |
Disconnect the revolution sensor connector.
Remove the bolt and transmission case protector.

Remove the transmission revolution sensor.

Using a screwdriver, remove the O-ring from the transmission revolution sensor.

