2005-2008 Yaris · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built from Nov 2005


1. INSTALL BACK-UP LIGHT SWITCH ASSEMBLY

C112894E01
  1. Using SST, install the back-up light switch with a new gasket onto the transaxle case.

    SST
    09817-16011  

    Torque:
    40 N*m{ 410 kgf*cm , 30 ft.*lbf }

  1. C112893
    Install the back-up light switch wire harness into the 2 clamps.

  1. Connect the back-up light switch connector.


2. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING BRACKET (for 1KR-FE)

C121113
  1. Install the engine mounting bracket LH with the 4 bolts.

    Torque:
    64 N*m{ 653 kgf*cm , 47 ft.*lbf }


3. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING BRACKET (for 2SZ-FE)

C121114
  1. Install the engine mounting bracket LH with the 4 bolts.

    Torque:
    64 N*m{ 653 kgf*cm , 47 ft.*lbf }


4. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR (for 1KR-FE)

C108066E01
  1. Install the engine mounting insulator LH with the 4 bolts.

    Torque:
    52 N*m{ 530 kgf*cm , 38 ft.*lbf } for bolt A
    64 N*m{ 653 kgf*cm , 47 ft.*lbf } for bolt B

  1. Install the engine mounting bracket LH and engine mounting insulator LH with the bolt and nut.

    Torque:
    52 N*m{ 530 kgf*cm , 38 ft.*lbf } for nut C


5. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR (for 2SZ-FE)

C121115
  1. Install the engine mounting insulator LH with the 5 bolts.

    Torque:
    52 N*m{ 530 kgf*cm , 38 ft.*lbf }

  1. Install the engine mounting bracket LH and engine mounting insulator LH with the bolt and nut.

    Torque:
    52 N*m{ 530 kgf*cm , 38 ft.*lbf }


6. INSTALL BATTERY CARRIER (for 1KR-FE)

C106985
  1. Install the battery carrier with the 4 bolts.

    Torque:
    17 N*m{ 175 kgf*cm , 13 ft.*lbf }


7. INSTALL BATTERY CARRIER (for 2SZ-FE)

C106370
  1. Install the battery carrier with the 5 bolts.

    Torque:
    17 N*m{ 175 kgf*cm , 13 ft.*lbf }


8. INSTALL BATTERY TRAY

9. INSTALL BATTERY

10. INSTALL BATTERY HOLD DOWN CLAMP

11. INSTALL AIR CLEANER INLET NO.1 (for 2SZ-FE)

C127624
  1. Install the air cleaner inlet No. 1.


12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

← INSPECTION (from Nov 2005)COMPONENTS (from Nov 2005) →