REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE NO. 1 AIR CLEANER HOSE |
Loosen the hose clamp and disconnect the No. 1 air cleaner hose.

Disconnect the 2 fuel hoses.
Loosen the 2 clips and disconnect the No. 1 air cleaner hose.
| 3. REMOVE AIR CLEANER ASSEMBLY |
Remove the 3 bolts, then remove the air cleaner case with air the cleaner inlet.

| 4. REMOVE BATTERY HOLD DOWN CLAMP |
| 5. REMOVE BATTERY |
| 6. REMOVE BATTERY TRAY |
| 7. REMOVE BATTERY CARRIER |
Remove the 5 bolts and the battery carrier.

| 8. REMOVE NO. 2 AIR HOSE |
Loosen the 2 hose clamps and remove air hose No. 2.

| 9. REMOVE NO. 1 AIR TUBE |
Loosen the hose clamp and disconnect the No. 1 air hose.

Remove the bolt and separate the wire harness bracket.
Remove the 2 bolts and remove the No. 1 air tube.
| 10. REMOVE BACK-UP LIGHT SWITCH ASSEMBLY |
![]() ![]() |
Disconnect the wire harness clamp.
Remove the bolt and separate the wire harness bracket.
Disconnect the back-up light switch connector.
Using SST, remove the back-up light switch and gasket from the transaxle case.

- SST
- 09817-16011

