REMOVAL
Removal / installation · Vehicles built from Jan 2006
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY |
for 60/40 Split Seat Type:
Remove the rear seat cushion cover pad sub-assembly (Click here).
for Fixed Seat Type:
Remove the rear seat cushion cover pad sub-assembly (Click here).
| 3. REMOVE REAR SEATBACK ASSEMBLY |
for 60/40 Split Seat Type:
Remove the rear seatback assembly (Click here).
for Fixed Seat Type:
Remove the rear seatback assembly (Click here).
| 4. REMOVE LUGGAGE COMPARTMENT FLOOR MAT (for 60/40 Split Seat Type) |
![]() ![]() |
Remove the luggage compartment floor mat.
| 5. REMOVE SPARE WHEEL COVER ASSEMBLY (for 60/40 Split Seat Type) |
![]() ![]() |
Remove the spare wheel cover.
| 6. REMOVE LUGGAGE COMPARTMENT TRIM INNER PAD (for 60/40 Split Seat Type) |
![]() ![]() |
Remove the luggage compartment trim inner pad.
| 7. REMOVE REAR DOOR SCUFF PLATE |
Disengage the 7 claws and remove the rear door scuff plate.

| 8. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP |
Remove the rear door opening trim weatherstrip to the extent that the rear seat side cover and roof side inner garnish can be removed.

| 9. REMOVE REAR SEAT SIDE COVER |
Disengage the 2 clips and the 4 claws and remove the rear seat side cover.

| 10. REMOVE ROOF SIDE INNER GARNISH |
w/ Curtain Shield Airbag:

- NOTICE:
- Replace the special clip with a new one when the roof side inner garnish is removed.
Disengage the 4 clips and the claw and remove the roof side inner garnish.
w/o Curtain Shield Airbag:

Disengage the 4 clips and the claw and remove the roof side inner garnish.
| 11. REMOVE AMPLIFIER ANTENNA ASSEMBLY |
Disconnect the antenna connector.

Disconnect the 2 amplifier antenna connectors.
Disengage the clamp.
Remove the bolt and the amplifier antenna.



