INSTALLATION
Removal / installation · Vehicles built from Aug 2005
| 1. INSTALL TRANSMISSION REVOLUTION SENSOR |
![]() ![]() |
Coat a new O-ring with ATF, and install it onto the transmission revolution sensor.
Install the transmission revolution sensor with the bolt.

- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
Connect the transmission revolution sensor connector.
| 2. INSTALL BATTERY CARRIER |
![]() ![]() |
Install the battery carrier with the 5 bolts.
- Torque:
- 17 N*m{ 173 kgf*cm , 13 ft.*lbf }
Install the clamp.
| 3. INSTALL BATTERY TRAY |
| 4. INSTALL BATTERY |
Install the battery onto the vehicle with the battery clamp.
- Torque:
- 3.5 N*m{ 36 kgf*cm , 31 in.*lbf }
Connect the cable to the battery terminal.
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }


