2005-2008 Yaris · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Aug 2005


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE ENGINE UNDER COVER LH

3. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY

C117100E01
  1. Remove the nut and disconnect the control cable from the control shaft lever.

  1. Remove the clip and disconnect the control cable from the control cable bracket.


4. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
  1. Disconnect the connector from the park/neutral position switch assembly.

  1. C117101
    Remove the nut, washer and control shaft lever.

  1. C117104
    Pry out the lock plate and remove the manual valve shaft nut.

  1. C117106
    Remove the 2 bolts and pull out the park/neutral position switch assembly.

← ON-VEHICLE INSPECTION (from Aug 2005)INSPECTION (from Aug 2005) →