REMOVAL
Removal / installation · Vehicles built from Aug 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE ENGINE UNDER COVER LH |
| 3. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY |
![]() ![]() |
Remove the nut and disconnect the control cable from the control shaft lever.
Remove the clip and disconnect the control cable from the control cable bracket.
| 4. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY |
Disconnect the connector from the park/neutral position switch assembly.
Remove the nut, washer and control shaft lever.

Pry out the lock plate and remove the manual valve shaft nut.

Remove the 2 bolts and pull out the park/neutral position switch assembly.


