2005-2008 Yaris · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2005


1. REMOVE 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY

D003796E04
  1. Using SST and a press, remove the snap ring from the 2nd brake piston.

    SST
    09387-00060  

  1. Remove the 2nd brake return spring from the 2nd brake cylinder.

  1. C067862
    Remove the 2nd brake piston return spring sub-assembly from the 2nd brake cylinder.


2. REMOVE 2ND BRAKE PISTON

C067863
  1. Hold the 2nd brake piston and apply compressed air (392 kPa, 4.0 kgf/cm2 , 57 psi) to the 2nd brake cylinder to remove the 2nd brake piston.


3. REMOVE 2ND BRAKE CYLINDER O-RING

C067864
  1. Using a screwdriver, remove the 2 O-rings from the 2nd brake cylinder.

← COMPONENTS (from Aug 2005)INSPECTION (from Aug 2005) →