REASSEMBLY
Removal / installation · Vehicles built from Aug 2005
| 1. INSTALL 2ND BRAKE CYLINDER O-RING |
![]() ![]() |
Coat 2 new 2nd brake cylinder O-rings with ATF, and install them into the 2nd brake cylinder.
- NOTICE:
- Do not damage the O-rings.
| 2. INSTALL 2ND BRAKE PISTON |
![]() ![]() |
Coat the 2nd brake piston with ATF, and install it into the 2nd brake cylinder.
- CAUTION:
- Do not damage the O-rings when pressing the 2nd brake piston into the 2nd brake cylinder by hand.
| 3. INSTALL 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY |
![]() ![]() |
Install the piston return spring.
Place SST on the piston return spring, and compress the piston return spring with a press.

Using a screwdriver, install the snap ring.
- NOTICE:
- Make sure that the end gap of the snap ring is not aligned with the piston return spring claw.



