2005-2008 Yaris · Service Manual TRANSMISSION

REASSEMBLY

Removal / installation · Vehicles built from Aug 2005


1. INSTALL INPUT SHAFT OIL SEAL RING

C067858
  1. Coat a new input shaft oil seal ring with ATF, and install it into the input shaft.


2. INSTALL FORWARD CLUTCH PISTON O-RING

C067857
  1. Coat a new clutch piston O-ring with ATF, and install it into the forward clutch piston.


3. INSTALL FORWARD CLUTCH PISTON

C068199
  1. Install the forward clutch piston into the input shaft.

    NOTICE:
    Do not damage the O-ring.


4. INSTALL FORWARD CLUTCH RETURN SPRING SUB-ASSEMBLY

C067854
  1. Install the return spring and clutch balancer into the input shaft.

  1. D008368E01
    Using SST, a press and snap ring pliers, install the snap ring onto the input shaft.
    SST
    09320-89010  


5. INSTALL FRONT CLUTCH CLUTCH DISC

D025109E02
  1. Install the 4 plates, 4 discs and flange.

  1. Using a screwdriver, install the snap ring into the input shaft.


6. INSPECT PACK CLEARANCE OF FORWARD CLUTCH

C067860
  1. Using a dial indicator, measure the pack clearance while applying and releasing compressed air (392 kPa, 4.0 kgf/cm2, 57 psi).

    Pack clearance:
    1.406 to 1.806 mm (0.05535 to 0.07110 in.)

    NOTICE:
    If the clearance is outside the specifications, select a new brake flange.

    HINT:
    There are 4 different flange thicknesses.

    Flange thickness:
    No.
    Thickness mm (in.)
    No.
    Thickness mm (in.)
    -
    3.00 (0.1181)
    2
    3.40 (0.1339)
    1
    3.20 (0.1260)
    3
    3.60 (0.1417)

← INSPECTION (from Aug 2005)COMPONENTS (from Aug 2005) →