DISASSEMBLY
Removal / installation · Vehicles built from Aug 2005
| 1. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING |
![]() ![]() |
Using SST, remove the front differential case front tapered roller bearing from the differential case.
- SST
- 09950-40011
(09951-04010, 09952-04010, 09953-04030, 09954-04010, 09955-04061, 09957-04010, 09958-04011)
09950-60010 (09951-00390)
Using SST, remove the front differential case RH tapered roller bearing outer race from the transaxle housing.

- SST
- 09387-00041
(09387-02020, 09387-02010)
| 2. REMOVE SPEEDOMETER DRIVE GEAR |
Remove the speedometer drive gear from the differential case.

| 3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING |
![]() ![]() |
Using SST, remove the front differential case tapered roller bearing from the differential case.
- SST
- 09950-40011
(09951-04010, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011)
09950-60010 (09951-00430)
Using SST, remove the front differential case tapered roller bearing outer race from the transaxle case.

- SST
- 09612-65014
(09612-01010)
| 4. REMOVE FRONT DIFFERENTIAL RING GEAR |
![]() ![]() |
Place matchmarks on the front differential ring gear and differential case.
Using SST and a hammer, release the lock plates.

- SST
- 09930-00010
Remove the 8 bolts and the lock plates.

Using a plastic hammer, remove the front differential ring gear from the differential case.

| 5. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN |
![]() ![]() |
Using a punch and a hammer, release the differential case.
Using a pin punch and a hammer, remove the straight pin.

| 6. REMOVE FRONT DIFFERENTIAL PINION SHAFT NO. 1 |
![]() ![]() |
Remove the pinion shaft from the front differential case.
| 7. REMOVE FRONT DIFFERENTIAL SIDE GEAR |
![]() ![]() |
Remove the 2 pinions, 2 thrust washers, 2 side gears and 2 thrust washers No. 1 from the front differential case.






