2005-2008 Yaris · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from Nov 2005


INSPECT FRONT DIFFERENTIAL PINION THRUST WASHER

C068517
  1. Using a micrometer, measure the thickness of the front differential pinion thrust washer.

    Minimum thickness:
    0.92 mm (0.0362 in.)

    If the thickness is less than the minimum, replace the front differential pinion thrust washer.


INSPECT FRONT DIFFERENTIAL PINION SHAFT NO. 1

C068518
  1. Using a micrometer, measure the outer diameter of front differential pinion shaft No. 1.

    Minimum outer diameter:
    16.982 mm (0.6686 in.)

    If the outer diameter is less than the minimum, replace front differential pinion shaft No. 1.

← DISASSEMBLY (from Nov 2005)REASSEMBLY (from Nov 2005) →