DISASSEMBLY
Removal / installation · Vehicles built from Aug 2005
| 1. REMOVE SELECT SPRING SEAT NO.2 |
![]() ![]() |
Using a screwdriver, remove the select spring No. 2 seat E-ring, select spring seat No. 2 and select return compression spring No. 2 from the shift and select lever shaft.
| 2. REMOVE SHIFT LEVER INNER NO.2 |
![]() ![]() |
Using a pin punch (φ5 mm) and a hammer, remove the shift inner lever slotted spring pin and shift lever inner No. 2 from the shift and select lever shaft.
- HINT:
- Check the orientation of shift lever inner No. 2.
| 3. REMOVE SHIFT LEVER INNER NO.1 |
![]() ![]() |
Using a pin punch (φ5 mm) and a hammer, remove the shift inner lever slotted spring pin, shift lever inner No. 1 and shift inter lock plate from the shift and select lever shaft.
- HINT:
- Check the orientation of shift lever inner No. 1.
| 4. REMOVE SELECT INNER LEVER |
![]() ![]() |
Using a pin punch (φ5 mm) and a hammer, remove the select inner lever slotted spring pin, select inner lever, select return compression spring No. 1 and select spring seat No. 1 from shift and select lever shaft.
- HINT:
- Check the orientation of the select inner lever.
| 5. REMOVE SELECT SPRING NO.1 SEAT SHAFT SNAP RING |
![]() ![]() |
Using 2 screwdrivers and a hammer, remove the select spring No. 1 seat shaft snap ring.






