DISASSEMBLY
Removal / installation · Vehicles built from Nov 2006
| 1. REMOVE NO. 2 SELECT SPRING SEAT |
![]() ![]() |
Using a screwdriver, remove the select spring No. 2 seat E-ring, No. 2 select spring seat and No. 2 select return compression spring from the shift and select lever shaft.
| 2. REMOVE NO. 2 SHIFT LEVER INNER |
![]() ![]() |
Using a pin punch (φ5 mm) and a hammer, remove the shift inner lever slotted spring pin and No. 2 shift lever inner from the shift and select lever shaft.
- HINT:
- Check the orientation of the No. 2 shift lever inner.
| 3. REMOVE NO. 1 SHIFT LEVER INNER |
![]() ![]() |
Using a pin punch (φ5 mm) and a hammer, remove the shift inner lever slotted spring pin, No. 1 shift lever inner and shift inter lock plate from the shift and select lever shaft.
- HINT:
- Check the orientation of the No. 1 shift lever inner.
| 4. REMOVE SELECT INNER LEVER |
![]() ![]() |
Using a pin punch (φ5 mm) and a hammer, remove the select inner lever slotted spring pin, select inner lever, No. 1 select return compression spring and No. 1 select spring seat from the shift and select lever shaft.
- HINT:
- Check the orientation of the select inner lever.
| 5. REMOVE SELECT SPRING NO.1 SEAT SHAFT SNAP RING |
![]() ![]() |
Using 2 screwdrivers and a hammer, remove the select spring No. 1 seat shaft snap ring.






