2005-2008 Yaris · Service Manual HEATER & AIR CONDITIONING SYSTEM

INSPECTION

Inspection · Vehicles built from Aug 2005


INSPECT BLOWER MOTOR (for Manual Air Conditioning System)

  1. I101231E01
    Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1, then check that the motor operates smoothly.

    OK:
    The motor operates smoothly.

    If the operation is not as specified, replace the blower motor.

  1. Measure the current.

    Standard current:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Blower motor operates
    1 to 3 A

    If the current value is not as specified, replace the blower motor.


INSPECT BLOWER MOTOR (for Automatic Air Conditioning System)

I101233
  1. for LHD:

    1. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 3, then check that the motor operates smoothly.

      OK:
      The motor operates smoothly.

      If the operation is not as specified, replace the blower motor.

    2. Measure the current.

      Standard current:
      Tester Connection
      Condition
      Specified Condition
      1 - 3
      Blower motor operates
      1 to 3 A

      If the current value is not as specified, replace the blower motor.

  1. I100854
    for RHD:

    1. Connect the positive (+) lead from the battery to terminal 3 and the negative (-) lead to terminal 1, then check that the motor operates smoothly.

      OK:
      The motor operates smoothly.

      If the operation is not as specified, replace the blower motor.

    2. Measure the current.

      Standard current:
      Tester Connection
      Condition
      Specified Condition
      1 - 3
      Blower motor operates
      1 to 3 A

      If the current value is not as specified, replace the blower motor.

← REMOVAL (from Jan 2006)INSTALLATION (Aug 2005 – Dec 2005) →