2005-2008 Yaris · Service Manual SUSPENSION & AXLE

DISPOSAL

Removal / installation · Vehicles built from Nov 2005


1. DISPOSE OF REAR SHOCK ABSORBER

C116872E01
  1. Fully extend the shock absorber piston rod.

  1. Using a drill or similar tool, slowly make a hole in the area (A-B) shown in the illustration to discharge the gas inside.

    NOTICE:
    1. The gas is colorless, odorless and harmless.
    2. Since the discharging gas may cause chips to scatter, cover the drill with a shop rag or piece of cloth when making the hole.

← INSTALLATION (from Nov 2005)COMPONENTS (from Jan 2006) →